Dry-type epoxy paint for concrete specializing in shortening construction time and
saving construction cost in floor painting
Epoxy under coat for general building floors and
factory indoor floors
Quick Dry
Gloss
Chemical Resistance
Waterproof
Permeability
Adhesion
Category | Product | Construction Date | Material Cost | Labor Cost |
Total | |||
---|---|---|---|---|---|---|---|---|
Primer Coat | Finish coat | Primer Coat | Finish coat | Total | ||||
Epoxy flooring system coating |
Epipuroa quick-drying primer |
EPIDECK 3000 PLUS or EPIFLOOR EP-4 |
Day 1 (morning) |
Day 1 (afternoon) - Day 2 |
Day 2 | 45% | 40% | 85% |
Episol Tile Prima #J1 | Day 1 | Day 2 | Day 3 | 40% | 60% | 100% |
Epoxy low-odor oil-based floor paint used on concretes
Oil-Based / Low-Odor / Workability
Category | System | Liquid Type | Product Name | Characteristics |
---|---|---|---|---|
Oil-Based Thin Film-Type (Solvent-Based Type) |
Primer Coat | 2 liquid type | EPYSOL tile primer #Low-Odor | Oil-Based Low-Odor Under Coat |
Finish coat | 2 liquid type | EPIFLOOR #Low-Odor | Oil-Based Low-Odor Top Coat (Thin Film Type /Solvent-Based Type) |
Epoxy low-odor oil-based floor paint used on concretes
Oil-Based / Low-Odor / Workability
Category | System | Liquid Type | Product Name | Characteristics |
---|---|---|---|---|
oil-based lining Post-coat type (non-solvent type) |
Primer Coat | 2 liquid type | EPYSOL tile primer #Low-Odor | Oil-Based Low-Odor Under Coat |
Finish coat | 2 liquid type | EPIDECK 300 PLUS FREE #Low-Odor | Solvent-free, low-odor top coat |
Remove pollutants, such as dust and oil, from surface and paint.
※ This affects adhesive force of paint film and causes paint film defects and shorter paint film durability.
To paint a flat and wide area, use a roller brush with higher efficiency easier work compared to brush painting.
You must fill the pretreated surface’s crack or dents with putty and perform other surface treatments before painting.
Stir the content thoroughly before painting. After drying the painted side, work on intermediate coat and top coat.
Test the paint on a narrow area before painting.
Stir paint and curing agent in proportion labeled on product before painting.
Paint in temperature over 5℃ and humidity below 85%
In repair painting, remove the old paint film before painting.
Paint shall be transported in temperature of 5~35°C and stored away from direct sunlight.
In case of painting on the mortar of the new cerement, take enough curing period (20°C, over 30 days) before painting.
Hands-on from technical experts from start to finish!